Carrier Mounted Augers
Jet Flow carrier mounted augers (CMA) are designed to work with grain bins as large as 42' x 26'. Adding a Jet Flow roof auger will allow you to go even higher. Jet Flow offers these augers in three different sizes, 6", 8" and 10". CMA's are built to be powered by either a power take off shaft or mounted electric motor. Carrier mounted augers are shipped from the factory in pre-assembled sections to speed field setup. To view other photos of carrier mounted augers, Click Here.
6" CARRIER MOUNTED AUGER SPECIFICATIONS
Tube: Seamless 16 Gauge Galvanized Tube
Screw: 10 Gauge Flite On 1" ID Pipe
Drive Head: #50 Roller Chain & Hardened Sprockets
Auger Speed: 550 to 650 RPM
Drive Pulley: 3-1/2" For Electric Motors
See Bottom of This Page For All Other Statistics and Accessories
To View 6" CMA Catalog Pages, Click Here
|
Specifications |
Drive | ||||
|
Size |
Maximum |
Approx. Weight |
Top Electric# |
Horse Power |
PTO |
|
6" x 32' 6" x 42' 6" x 47' 6" x 52' 6" x 57' 6" x 62' |
22'-6" 27'-6" 32'-6" 37'-6" 39'-6" 43'-3" |
655 795 910 990 1090 1240 |
00265 00108 00111 00114 00117 00120 |
3 3 5 5 5 7-1/2 |
00266 00106 00109 00112 00115 00118 |
8" CARRIER MOUNTED AUGER SPECIFICATIONS
Tube: Seamless 14 Gauge Galvanized Tube
Screw: 10 Gauge Flite On 1-3/8" ID Pipe
Drive Head: #60 Roller Chain & Hardened Sprockets
Auger Speed: 550 to 650 RPM
Drive Pulley: 3-1/2" For Electric Motors
See Bottom of This Page For All Other Statistics and Accessories
To View 8" CMA Catalog Pages, Click Here
|
Specifications |
Drive | ||||
|
Size |
Maximum |
Approx. Weight |
Top Electric# |
Horse Power |
PTO |
|
8" x 32' 8" x 42' 8" x 47' 8" x 52' 8" x 57' 8" x 62' |
22'-6" 27'-6" 32'-6" 37'-6" 39'-6" 43'-3" |
800 1050 1175 1280 1400 1525 |
00267 00126 00129 00132 00135 00138 |
5 5 7-1/2 7-1/2 10 10 |
00268 00124 00127 00130 00133 00136 |
10" CARRIER MOUNTED AUGER SPECIFICATIONS
Tube: Seamless 12 Gauge Galvanized Tube
Screw: 7 Gauge Flite On 2" ID Pipe
Drive Head: Double #60 Roller Chain & Hardened Sprockets
Auger Speed: 350 to 450 RPM
Drive Pulley: 3-1/2" For Electric Motors
See Bottom of This Page For All Other Statistics and Accessories
To View 10" CMA Catalog Pages, Click Here
|
Specifications |
Drive | ||||
|
Size |
Maximum |
Approx. Weight |
Top Electric# |
Horse Power |
PTO |
|
10" x 32' 10" x 42' 10" x 52' 10" x 62' |
22'-6" 27'-6" 37'-6" 43'-3" |
1360 1735 2150 2650 |
00269 00145 00149 00153 |
5 7-1/2 10 15 |
00270 00143 00147 00151 |
Statistics:
Factory assembled section to speed field setup. No section longer than 22' long.
Pipe undercarriage with automotive bearings & 15" wheel.
Intake guard with retractable hitch & impregnated wood bearing.
Double flite on intake screw.
1" plated solid driveline, with self-aligning impregnated wood bearings. 1-1/4" solid driveline on 10" augers.
Enclosed drive head on 6" & 8". Chain runs in grease.
Reduction brake winch with galvanized aircraft cable.
Auger pulley & belts furnished on top electric motor mount drives.
CMA Links:
To view 6" CMA Catalog Page, Click Here
To view 8" CMA Catalog Page, Click Here
To view 10" CMA Catalog Page, Click Here
To view Carrier Mounted Auger Accessories, Click Here
To view PTO Break Down Page, Click Here.
Need to find the nearest dealer to you? Our Dealer Network Service is your first stop.
For More Information Contact:
Luffland Industries
Bates City, Missouri
Tel: 816/625-4022
FAX: 816/690-4386
Internet: Luffland@aol.com
